Wholesale & export
Wholesale Leather Hides: Types, Stages and Buying Criteria
Wholesale leather hides are traded at several stages: raw (salted or dried), pickled, wet blue or wet white, crust and finished. Buyers specify the animal, processing stage, size, thickness, grade and finish, and confirm documentation required by the importing country.
Author: DERIPORT Editorial Team · Published: · Updated:
Short answer
Wholesale leather hides are bought and sold at several stages of processing, from raw salted hides to fully finished leather. The right stage depends on what the buyer does next: tanneries buy raw or semi-processed hides, while leather goods, footwear, garment and upholstery manufacturers usually buy finished leather. A useful purchase specification states the animal origin, processing stage, size, thickness, grade, colour and finish, and the documentation needed for import.
Hides and skins: the basic terms
In the trade, hides usually refers to the pelts of larger animals such as cattle and buffalo, while skins refers to smaller animals such as calves, sheep, lambs and goats. Each has a different fibre structure, which affects strength, softness and typical end uses.
- Cattle hides: large, relatively thick and strong; widely used for bags, belts, footwear, upholstery and automotive leather. They are commonly split into a grain layer and a split layer.
- Calfskins: smaller with a finer, tighter grain; often used for premium small leather goods and footwear.
- Sheepskins and lambskins: soft and light; common in garments, gloves and linings.
- Goatskins: durable with a distinctive grain; used in footwear, bags and gloves.
Exotic skins are a separate category with specific legal requirements, covered briefly below.
Processing stages traded wholesale
Stage | Description | Typical buyer |
|---|---|---|
Raw (salted or dried) | Hide preserved after slaughter by salting or drying, not yet tanned | Tanneries |
Pickled | Hide treated in acid and salt after beamhouse processing, ready for tanning | Tanneries |
Wet blue | Tanned with chromium salts; moist and blue-grey in colour | Tanneries doing retanning and finishing |
Wet white | Tanned without chrome as the main tanning agent; pale in colour | Tanneries targeting chrome-free articles |
Crust | Tanned, retanned, dyed and dried, but not yet surface-finished | Finishers and some goods manufacturers |
Finished leather | Fully finished with the final surface, colour and effect | Goods, footwear, garment and upholstery makers |
Buying at an earlier stage gives more control over the final article but requires tanning or finishing capability. Buying finished leather transfers that work to the tannery and makes the specification more important.
How hides are measured and priced
Measurement conventions differ by stage:
- Raw and pickled hides are often traded by weight or by piece, sometimes within agreed weight ranges.
- Wet blue may be traded by weight, by piece or by area, depending on the contract.
- Crust and finished leather are usually sold by area, in square feet or square metres, measured by machine.
Agree the measuring method and any tolerance in the contract. Small differences in measurement can have a significant effect on the effective price per usable area.
Thickness and splitting
Thickness, also called substance, is a key specification. It is normally given as a range in millimetres, for example 1.2 to 1.4 mm, rather than a single value, because genuine leather varies naturally across a hide. Suitable thickness depends on the product: garment leathers are generally thinner and softer, while belts, saddlery and structured bags generally use thicker leather.
Cattle hides are often split horizontally. The upper layer carries the grain and is used for full-grain or corrected-grain leather. The lower layer becomes split leather, which may be made into suede or given a coated finish. Specify which layer you are buying.
Grading and defects
Grading describes the quality of the surface and the proportion of usable area. Common defects include:
- Scratches and healed wounds
- Brand marks
- Insect and parasite damage
- Growth marks and veins
- Holes, cuts and flay damage from processing
- Uneven colour or finish on finished leather
There is no single universal grading system. Suppliers use their own grade names, often expressed as letters or numbers or as a percentage of usable area. Ask how each grade is defined, request reference samples for each grade, and record the definitions in the contract.
Selections and lot consistency
For production use, consistency within and between lots matters as much as the grade itself. Ask about:
- Colour matching between batches and the tolerance accepted.
- Whether hides in a lot come from the same tanning batch.
- How the supplier handles mixed grades in a shipment.
Tanning choice and end use
Tanning | Characteristics | Common uses |
|---|---|---|
Chrome-tanned | Soft, consistent, good heat and water resistance | Footwear uppers, bags, garments, upholstery |
Vegetable-tanned | Firm, takes tooling and burnishing, develops patina | Belts, saddlery, structured goods, insoles |
Chrome-free / wet white | Pale base, specified for chrome-free requirements | Automotive, some brand-specific articles |
The tanning method also affects downstream processing, test results and how the leather should be described to customers.
Documentation and regulation
International trade in hides involves several regulatory areas. Requirements vary by country and should always be verified with the competent authorities.
- Customs classification: raw hides, skins and leather fall under HS Chapter 41 of the Harmonized System; furskins are in Chapter 43. National tariffs add further digits to the six-digit HS code.
- Animal health rules: raw and some semi-processed hides may be treated as animal by-products and need veterinary or health certificates. Tanned leather is generally treated differently, but confirm the rules for your product and destination.
- Protected species: skins from species listed under CITES generally require permits or certificates for international trade, and commercial trade in Appendix I species is prohibited except in limited cases.
- Chemical requirements: finished leather may need test reports for restricted substances, such as chromium VI in markets that limit it.
- Traceability: some buyers and markets request information on the origin of hides. Agree in advance what can be documented.
Preparing a purchase specification
A clear specification reduces disputes. Include:
- Animal type and, where relevant, origin.
- Processing stage and tanning method.
- Thickness range and measurement method.
- Size or area range per hide or side.
- Grade definitions and reference samples.
- Colour, finish and surface effect for finished leather.
- Test and documentation requirements for the destination market.
- Packing, labelling and the Incoterms rule for delivery.
Buyers can send DERIPORT their specification for a quotation.
Storage and handling
Raw and wet-processed hides are perishable and must be stored and transported under suitable conditions to avoid putrefaction or mould. Crust and finished leather should be stored flat or rolled, away from direct sunlight, heat and moisture, and protected from pressure marks. Agree packing standards with the supplier before shipment.
Frequently asked questions
Do I need special permits to import raw hides?
Possibly. Raw and some semi-processed hides can be subject to animal health rules, and exotic skins may require CITES permits. Requirements differ by country, so check with the relevant veterinary and customs authorities before ordering.
Is there a standard grading system for hides?
No single grading system is used by all suppliers. Grades are usually defined by surface defects and usable area, so ask each supplier for its definitions and reference samples, and include them in the contract.
Are leather hides sold by weight or by area?
It depends on the processing stage and the contract. Raw and pickled hides are often sold by weight or piece, while crust and finished leather are usually sold by area in square feet or square metres. Always agree the measuring method in writing.
What is the difference between wet blue and wet white?
Wet blue is leather tanned with chromium salts, which gives it a blue-grey colour while still moist. Wet white is tanned without chrome as the main tanning agent, using alternatives such as aldehydes, synthetic tannins or vegetable tannins, and has a pale colour.
References
- HS Nomenclature 2022 edition — World Customs Organization
- What is the Harmonized System (HS)? — World Customs Organization
