Leather knowledge
Types of Genuine Leather: Animal, Grain, Tanning and Finish
Genuine leather is tanned animal hide or skin with its natural fibre structure intact. Its types are best understood along four axes: animal origin, layer of the hide, tanning method and surface finish.
Author: DERIPORT Editorial Team · Published: · Updated:
Short answer
Genuine leather, in its proper sense, is any material made from an animal hide or skin that has been tanned so that it no longer putrefies, while keeping its natural fibre structure. Within that definition there are many types. They are usually classified along four independent axes: which animal the hide came from, which layer of the hide is used, how it was tanned, and how the surface was finished.
Understanding these four axes is more useful than memorising trade names, because most product names (nappa, pull-up, crazy horse, nubuck) describe a combination of them.
What counts as leather, and what does not
Before looking at types, it helps to draw the boundary clearly. Buyers regularly receive offers in which the word leather is used loosely.
Material | Made from | Is it leather? |
|---|---|---|
Finished genuine leather | Tanned hide or skin, fibre structure intact, thin surface finish | Yes |
Coated leather | Tanned hide with a thicker applied surface coating | Yes, but should be identified as coated |
Patent leather | Tanned hide with a glossy lacquer or resin coating | Yes, but should be identified as patent leather |
Bonded / reconstituted leather | Shredded leather fibres mixed with binders, formed into sheets | No, not in the strict sense |
PU or PVC synthetic | Polymer coating on a textile backing | No |
Plant-based materials (cork, cactus, apple, grape, mycelium, etc.) | Plant or fungal matter, often combined with polymer binders or coatings | No |
Under the terminology used in ISO 15115 and EN 15987, leather whose surface coating is thicker than 0.15 mm (but not more than one third of the total thickness) is described as coated leather rather than simply leather. Under the same terminology, materials made from disintegrated or ground leather fibres should not be described simply as leather. Labelling and consumer rules differ between countries, so the exact wording permitted on a product label should be checked against the rules of the destination market.
A note on the trade term itself: in some retail markets, the words genuine leather printed on a product have come to signal a lower-grade split or heavily corrected material. Technically the term only means real leather, so a specification should always state the grain type and finish rather than relying on the phrase alone.
Axis 1: Animal origin
The animal largely determines size, thickness range, grain pattern and strength.
- Cattle hide (cowhide, steer, bull) - large, thick and strong. The most widely used leather for bags, belts, footwear, upholstery and automotive interiors.
- Calfskin - from young cattle. Finer, tighter grain and smoother surface than adult cowhide, in smaller skins.
- Goatskin (including kid) - strong for its weight, often with a characteristic pebbled grain. Common in gloves, small leather goods, bookbinding and linings.
- Sheepskin and lambskin - very soft and supple but with a looser fibre structure, so typically less abrasion resistant. Popular for garments and gloves.
- Buffalo - coarser grain and a robust feel; used in bags, footwear and upholstery.
- Pig skin - recognisable by visible pore groups; often used for linings and gloves.
- Exotic skins - crocodile, alligator, caiman, ostrich, python, lizard, stingray and others. Many of these species are listed under CITES, which means international trade can require permits and documentation. Requirements depend on the species and the countries involved and must be verified with the relevant CITES management authorities before purchase.
Axis 2: Layer of the hide (grain type)
A hide is usually too thick for most products, so it is split horizontally. The top layer carries the grain, the natural outer surface, and the lower layer or layers are called splits.
Full-grain leather
The complete grain surface is retained; it is not sanded or buffed to remove imperfections. Natural marks, pores and variations remain visible. It is generally regarded as the most durable grain type and develops a patina with use.
Top-grain leather
The grain layer separated from the split, often lightly buffed or sanded to even out the surface before finishing. Usage of this term varies by market: some people use top grain for any grain-side leather, including full grain, while others reserve it for lightly corrected grain leather. Clarify the intended meaning with your supplier.
Corrected-grain leather
Grain leather that has been buffed more heavily, then given an embossed artificial grain and a pigmented finish to hide defects. It offers a uniform look and good surface resistance, but loses some breathability and natural character.
Split leather
The lower layer of the hide, without the original grain. Splits can be finished as suede, embossed and coated to imitate grain leather, or used for linings and work gloves. Coated splits should be declared as such.
Axis 3: Tanning method
Tanning stabilises the collagen fibres of the hide. The main families are:
- Chrome tanning - uses basic chromium(III) salts. Comparatively fast, and produces soft, heat-stable leather that can be dyed in a wide colour range. The intermediate product is called wet blue.
- Vegetable tanning - uses tannins extracted from bark, wood, fruit and other plant sources. Produces firmer leather suited to tooling, burnishing and belts, which ages visibly.
- Chrome-free and metal-free tanning - uses aldehydes, synthetic tannins or other agents. The intermediate product is often called wet white. Used where buyers want leather without chromium.
- Combination tanning - for example chrome tanning followed by vegetable retanning, to blend the properties of each.
Chemical limits for leather that comes into contact with skin, such as restrictions on chromium(VI), exist in some jurisdictions (for example under EU REACH). Limits and testing requirements vary by market and should be confirmed with the competent authorities or an accredited laboratory.
Axis 4: Surface finish
The finish decides appearance, hand feel and resistance to stains and wear.
Finish | Surface treatment | Look and feel | Typical trade-off |
|---|---|---|---|
Aniline | Dyed through with soluble dyes, little or no pigment | Most natural, shows pores and marks | Least protection against stains and fading |
Semi-aniline | Dyed, plus a light pigmented or protective coat | Natural look with more uniformity | Moderate protection |
Pigmented | Opaque pigmented coating on the surface | Uniform colour, hides defects | More durable, less natural |
Nubuck | Grain side lightly buffed to a fine nap | Velvety, soft | Marks and stains easily |
Suede | Napped flesh side or split surface | Fibrous, soft nap | Absorbent, needs protection |
Pull-up / waxed / oiled | Impregnated with oils or waxes | Lightens when stretched or scratched | Shows wear by design |
Patent | Glossy lacquer or resin coating | High shine | Coated material; can crack if sharply folded |
Embossed | Pattern pressed into the surface | Imitates exotic or decorative grain | Pattern says nothing about origin |
Processing stages you will see in trade
Leather is also bought and sold at different stages of processing:
- Raw or preserved hides and skins - before tanning, usually salted or otherwise preserved.
- Wet blue / wet white - tanned but not yet dried, dyed or finished.
- Crust - tanned, retanned, dyed and dried, but not yet surface-finished.
- Finished leather - ready for cutting and manufacturing.
Buying at an earlier stage gives more control over the final finish but requires access to further processing.
How to specify leather type when buying
A clear written specification avoids most disputes. Include:
- Animal origin and, where relevant, country of origin
- Grain type (full grain, top grain, corrected grain or split)
- Tanning method (chrome, vegetable, chrome-free, combination)
- Finish (aniline, semi-aniline, pigmented, nubuck, suede, etc.)
- Thickness range in millimetres
- Colour reference and acceptable natural variation
- Any chemical, testing or certification requirements of the destination market
Where possible, approve a physical sample before bulk production, because two leathers described with identical words can still look and feel different. Buyers can send DERIPORT their specification for a quotation.
Frequently asked questions
Are plant-based leathers a type of genuine leather?
No. Materials based on cork, cactus, apple, grape, pineapple or mycelium are leather alternatives, not leather. Many of them include polymer binders or coatings, so their composition should be checked on the technical data sheet.
Which type of leather is the most durable?
Full-grain cattle hide is generally regarded as the most durable grain type because the dense, intact grain layer is retained. Actual durability also depends on thickness, tanning, finish and how the product is constructed.
Is bonded leather genuine leather?
Not in the strict sense. Bonded or reconstituted leather is made from shredded leather fibres combined with binders and formed into sheets, so it lacks the natural fibre structure of a hide. Labelling rules for such materials vary by country.
Is genuine leather a quality grade?
Technically no. The term only means the material is real leather made from a tanned hide or skin. In some retail markets it has become associated with lower-grade split or corrected leather, so buyers should ask for the grain type and finish instead of relying on the phrase.
