Leather knowledge
Nubuck vs Suede: How the Two Napped Leathers Differ
Nubuck is grain-side leather buffed to a very fine, short nap, while suede is usually made by napping the flesh side or a split, giving a longer, looser nap. Nubuck is typically stronger; suede is softer and more flexible.
Author: DERIPORT Editorial Team · Published: · Updated:
Short answer
Nubuck and suede are both genuine leathers with a velvety, napped surface, but they come from different sides of the hide.
- Nubuck is grain leather whose outer grain surface has been lightly buffed or sanded to raise a very fine, short nap.
- Suede is leather whose nap is raised on the flesh side, most often from a split, giving a longer and looser nap.
Because nubuck keeps the dense grain layer, it is generally stronger and more durable than suede of similar thickness. Suede is usually softer, more flexible and often less expensive.
How each is made
Nubuck
A tanned hide, most commonly cattle or calf, is taken with its grain side intact. The grain surface is then buffed with fine abrasives so that the very top of the grain is opened into short fibres. The result is a soft, velvety surface with a tight, even nap. Because the grain is only lightly buffed, nubuck keeps much of the strength of grain leather.
The quality of nubuck depends heavily on the hide: buffing reveals defects rather than hiding them, so good nubuck needs clean, well-selected hides.
Suede
Suede is produced by abrading the flesh side of a leather to raise a nap. In practice, much commercial suede is made from split leather, the lower layer of a hide separated during splitting. Some suede is made from the flesh side of thinner skins such as lamb, goat or calf, which can give a very fine, soft suede.
Because split layers lack the dense grain, suede has a more open structure, a longer nap and less tensile and tear strength than grain leather of the same thickness.
Comparison table
Aspect | Nubuck | Suede |
|---|---|---|
Side of hide | Grain side, buffed | Flesh side, usually a split |
Nap | Very fine, short, dense | Longer, looser, more fibrous |
Hand feel | Velvety, slightly firm | Soft, supple, sometimes fuzzy |
Strength | Generally higher | Generally lower |
Hide selection | Needs cleaner hides | More tolerant of grain defects |
Water and stain resistance (untreated) | Low | Low |
Typical relative cost | Higher | Lower |
Common uses | Footwear uppers, bags, belts, upholstery | Footwear, jackets, linings, gloves, bags, belts |
How to tell them apart
In a finished product, nubuck and suede can look similar, especially in dark colours. A few practical checks help:
- Nap length - brush your finger across the surface. Nubuck shows a subtle colour change with a fine, short pile. Suede typically shows a more noticeable, longer pile.
- Back of the leather - nubuck usually has a separate rough flesh side underneath; double-faced suede may look fibrous on both sides.
- Cross-section - on a cut edge, nubuck shows a denser upper layer, while split suede looks fibrous through the thickness.
- Ask the supplier - request a written description that states whether the material is grain nubuck, split suede or skin suede.
Related surfaces that are easily confused
- Oiled or waxed nubuck - nubuck impregnated with oils or waxes. It is darker, can show a pull-up effect and has some added water repellency. Crazy horse leathers are a related family of waxed, distressed-effect leathers.
- Velour - a trade name sometimes used for a fine suede, often from calf or split, with a short nap. Its exact meaning varies by market.
- Brushed or sanded corrected grain - grain leather given a light sueded surface but not a true nubuck.
- Microfibre suede and synthetic suede - non-woven polymer microfibre materials designed to imitate suede. They are not leather and should not be described as such.
Care and performance considerations
Both nubuck and suede have open, absorbent surfaces. Without treatment, they mark and stain more easily than smooth finished leather.
- Protective treatments - water and stain repellents can be applied at the tannery or by the manufacturer. Ask for the treatment type if the product will be used outdoors.
- Cleaning - dry methods such as a soft brush or a dedicated eraser are usually recommended first. Liquids can darken or spot the nap.
- Colour transfer - napped leathers can sometimes rub off colour, particularly in dark shades. Rub fastness testing is advisable for light-coloured garments or furniture that will come into contact with them.
- Wear patterns - the nap can flatten or polish in high-contact areas such as handles, corners and seat edges.
Care instructions should be validated on the actual material, because tannage, dyes and finishes differ from one leather to another.
Choosing between nubuck and suede
Nubuck tends to suit:
- Footwear uppers and bags that need a premium napped look plus good strength
- Products where a fine, uniform velvet surface is desired
- Furniture or accessories where a refined, tight nap is preferred
Suede tends to suit:
- Garments, jackets and gloves that need softness and drape
- Casual footwear and belts
- Linings and decorative elements
- Collections where cost is a priority and the softer, looser look is acceptable
Specifying napped leather for production
When requesting nubuck or suede, a useful specification typically includes:
- Animal origin and whether the material is grain nubuck, split suede or skin suede
- Thickness range in millimetres
- Nap description (short, medium, long) agreed against a physical sample
- Tanning method (chrome, chrome-free, vegetable or combination)
- Colour reference and acceptable shade variation
- Any water-repellent or stain-resistant treatment
- Required physical or chemical tests for the destination market
Buyers can send DERIPORT their specification for a quotation.
Frequently asked questions
Is microfibre suede a type of leather?
No. Microfibre or synthetic suede is a polymer-based material engineered to imitate suede. It should be labelled as a synthetic material, not as leather.
Are nubuck and suede waterproof?
Not by nature. Both have open surfaces that absorb water and stains easily. Water-repellent treatments can improve resistance, but they should be specified and tested for the intended use.
Which is more durable, nubuck or suede?
Nubuck is generally more durable because it retains the dense grain layer of the hide. Suede made from splits has a looser structure, so it is typically less resistant to tearing and abrasion at similar thickness.
Is nubuck the same as suede?
No. Both have a napped surface, but nubuck is made by buffing the grain side of the hide, while suede is made by napping the flesh side, usually of a split. Nubuck is generally stronger with a finer nap; suede is softer with a longer nap.
