Leather knowledge
Leather Quality Guide: Grain, Finish, Grade and Testing
Leather quality is the fit between a leather and its end use. It is judged on material type, grain, finish, selection of natural marks and measured test performance, not on a single universal grade scale.
Author: DERIPORT Editorial Team · Published: · Updated:
What "leather quality" really means
There is no single, universal quality scale for leather. Quality is the fit between a specific leather and its intended use. A soft aniline lambskin can be excellent for a glove and unsuitable for a sofa; a heavily pigmented corrected-grain leather can be the right choice for a hard-wearing bag and the wrong one for a luxury garment.
In practice, leather quality is judged on five connected areas:
- Material type – whether the material is genuine leather, coated leather, bonded leather fibre, synthetic or plant-based
- Grain and cut – which layer of the hide is used and how much the surface has been altered
- Finish – how much of the natural surface remains visible
- Selection (grade) – the number and type of natural marks and defects
- Measured performance – physical and chemical test results against the requirements of the end use
Material type: get the terminology right
Accurate terminology is the foundation of quality control, and some markets also have labelling rules for leather and leather-like materials.
Material | What it is | Key point for buyers |
|---|---|---|
Genuine leather | Hide or skin with its original fibrous structure, tanned to be imputrescible | Can be any grain type or finish |
Coated leather | Leather with a surface coating thicker than 0.15 mm (but not more than one third of the total thickness) but not more than one third of the total thickness | The coating strongly affects look and performance |
Patent leather | Leather with a glossy, typically high-build finish | A finish type, not a separate material |
Bonded leather fibre | Leather fibres, shredded and bound with a binder into a sheet | Not leather in the strict sense; must not be sold as genuine leather |
Synthetic (PU, PVC) | Polymer coating on a textile or other backing | No leather content |
Plant-based materials | Materials using plant-derived content such as cork, cactus, apple, grape, pineapple or mycelium | Many also contain polymer binders or coatings; composition varies by product |
The coated-leather definition above follows the terminology used in EN 15987 and ISO 15115. Labelling rules differ between countries, so check the requirements for each destination market.
Grain and cut
A hide is thick enough to be split into layers. The outer layer carries the grain, the dense fibre structure that gives leather most of its strength and surface character.
- Full grain – the complete grain surface, not sanded or buffed. Natural marks remain visible. Generally the strongest and most durable surface.
- Top grain – the grain layer with the surface lightly sanded or buffed to reduce marks. The term is used inconsistently in the trade, so ask what processing has been applied.
- Corrected grain – grain that has been buffed more heavily and then usually embossed and pigmented to create a uniform surface.
- Split leather – the lower layer(s) of the hide without the original grain. Used as suede, or coated or embossed to imitate grain. Usually weaker than grain leather of the same thickness.
Finish
- Aniline – coloured with soluble dyes and little or no pigment. Shows the natural surface and marks; sensitive to stains and light.
- Semi-aniline – a light pigmented coat that evens colour while keeping some natural character.
- Pigmented – a pigmented surface coating that gives uniform colour and higher resistance to wear and soiling, with less natural character.
- Special finishes – nubuck and suede (buffed surfaces), nappa (soft, full, smooth-handled grain leather), pull-up and crazy horse (oil or wax effects), embossed, metallic and patent finishes.
More finish usually means more uniformity and protection, and less visible natural grain. Neither is inherently better.
Selection and natural marks
Leather is a natural material and every hide carries a history: scars, insect bites, growth marks, veins, brand marks and areas of looser fibre structure, especially toward the belly. Tanneries sort hides into selections or grades according to the area free of such marks.
Grading systems are set by individual tanneries or agreed between buyer and supplier; there is no worldwide standard grade scale. When ordering:
- Agree on what counts as a defect versus an acceptable natural characteristic
- Agree on a reference sample or photographs for each selection
- Specify the usable area or cutting value expected, if this matters to your costing
- Check the position of marks relative to the pattern pieces you need
Cutting efficiency also depends on how well the cutter places pattern pieces around marks and on the direction of stretch in the hide.
Measured performance: tests that matter
Visual inspection is not enough for most commercial orders. Common laboratory tests, many described in ISO and EN standards, include:
- Thickness (ISO 2589) – measured under defined pressure and conditions
- Tensile strength and elongation (ISO 3376)
- Tear strength (ISO 3377 series)
- Colour fastness to rubbing (ISO 11640) – how much colour transfers to a rubbing cloth
- Flex resistance (ISO 5402 series) – resistance to cracking under repeated bending, important for uppers and bags
- Finish adhesion (ISO 11644) – how firmly the finish film is bonded to the leather
- Chromium(VI) content (ISO 17075 series) and other restricted-substance tests
Which tests apply, and what results are acceptable, depend on the product. Footwear, upholstery, automotive and garment leathers each have different typical requirements, and many brands publish their own specifications. Use an accredited laboratory and agree test methods and pass levels before production.
Simple checks you can do on samples
These checks do not replace laboratory testing but help screen samples:
- Look at the cut edge – genuine leather shows a fibrous cross-section; coated leather shows a visible surface layer; synthetics usually show a textile or foam backing.
- Examine the surface closely – natural grain shows irregular pore patterns; embossed patterns repeat.
- Flex the leather – watch for cracking, crazing of the finish or "pipey" grain that wrinkles loosely away from the fibres beneath.
- Rub with a white cloth – an indication of colour transfer, especially on aniline and nubuck.
- Check consistency – compare several hides or pieces for shade, thickness and handle.
Writing a quality specification
A good specification makes quality measurable. Include:
- Material type, animal origin and tanning method
- Grain type, finish type and colour reference with tolerance
- Thickness range and measurement method
- Selection or grade, with reference samples
- Physical tests and pass levels relevant to the end use
- Chemical compliance requirements for the destination markets
- Packing, labelling and documentation needs
Buyers can send DERIPORT their specification for a quotation.
Frequently asked questions
Which tests should I ask for?
It depends on the product. Common tests include thickness, tensile and tear strength, colour fastness to rubbing, flex resistance, finish adhesion and chromium(VI) content. Agree the methods and pass levels with the supplier and use an accredited laboratory.
Are there international leather grades like A, B and C?
Letter grades are widely used, but they are defined by individual tanneries or agreed between buyer and supplier, not by a single international standard. Always confirm what each grade means and use reference samples.
What is the difference between genuine leather and bonded leather?
Genuine leather keeps the hide's original fibrous structure. Bonded leather fibre is made from shredded leather fibres held together with a binder and is not leather in the strict sense. Selling it as genuine leather is misleading.
Is full-grain leather always the best quality?
Full grain is generally the strongest and most natural surface, but it shows natural marks and, in aniline finishes, can stain easily. For heavy-use products a corrected-grain or pigmented leather may perform better. The best choice depends on the end use and the look required.
